Nylon types: PA6, PA12, and CF-nylon
"Nylon" covers several different materials. Here is how the common filament types compare.
The short answer
PA6 is often chosen for toughness and wear resistance. PA12 is often chosen because it tends to be easier to print and more dimensionally stable. Carbon-fiber nylon adds stiffness and a matte finish, but needs a hardened nozzle.
Side-by-side
| PA6 (and PA6 blends) | PA12 | CF-nylon (PA-CF) | |
|---|---|---|---|
| Known for | Toughness and wear resistance | Steadier dimensions, some flexibility | Stiffness and a matte finish |
| Moisture sensitivity | High | Generally lower than PA6 | Depends on the base nylon |
| Warping | Can warp noticeably | Often warps less than PA6 | Carbon fibers often reduce shrinkage-related warping compared with similar unfilled nylons |
| Typical nozzle range | About 250–290 °C | About 240–270 °C | About 250–300 °C |
| Nozzle | Brass is commonly used for unfilled nylons | Brass is commonly used for unfilled nylons | Hardened nozzle strongly recommended |
| Enclosure | Strongly recommended | Recommended | Strongly recommended |
These ranges are general guidance only. Nylon blends vary a lot between brands, so start with your filament maker's recommended settings and adjust from there, staying within the limits of your printer and hotend.
PA6
PA6 is a widely used engineering nylon. It is valued for toughness and wear resistance, which makes it a frequent pick for gears, bushings, and hard-working clips. It tends to absorb moisture readily and can warp, so drying and an enclosure matter. Some filaments are PA6/66 copolymers or other blends; follow that product's settings.
PA12
PA12 generally absorbs less moisture and is often easier to print than many PA6 formulations. It can be a good first nylon. It still benefits from dry storage.
Carbon-fiber nylon (PA-CF)
Short chopped carbon fibers are added to a nylon base (often PA6 or PA12). This usually makes parts stiffer and gives a matte finish, and many makers find it warps less than unfilled nylon. The fibers are abrasive, so a hardened steel or similar wear-resistant nozzle is strongly recommended. Parts are usually stiffer but may be less flexible than unfilled nylon.
Other nylons you may see
- Glass-fiber nylon (PA-GF): similar idea to CF-nylon, also abrasive.
- Blends and copolymers: designed for easier printing; settings vary widely, so follow the maker's guidance.